User Tools

Site Tools


wiki:guides:lisa_admin_guide

Lisa Admin Guide

This guide is for Admins: the people at a customer who look after their company's phones in Lisa.

What Lisa is. Lisa (“Life Is Simple Again”) is the web portal for your HashKey phone system, which Vostel provides. The phone system does the calling. Lisa is where you see calls, change how calls are routed, manage your team's extensions and voicemail, keep contacts, and get reports.

Sign in to Lisa at https://lisa.vostel.co.uk. Use a current version of Chrome, Edge, Safari or Firefox. Click-to-call needs Chrome or Edge.

1. Roles: Admin and User

Everyone at your company has one of two roles in Lisa.

Role Shown as In short
customer_admin Admin Manages the phone system for the company. Changes routing, extensions, voicemail, greetings, users and integrations.
customer_user User Day-to-day use. Sees the Dashboard, call records, callbacks and contacts. Can make calls, join or leave their own ring groups and turn their own DND on or off. Cannot change the phone system's configuration.

Admins give extra access to individual people through Page access, covered in section 12.

What Users don't get. A User doesn't see these, so don't send them looking:

  • the Integrations and Users pages in the sidebar
  • edit buttons anywhere in Manage (numbers, routing, time conditions, IVRs, ring groups, extensions, voicemail)
  • adding a greeting. They can still play greetings.
  • VIP routing on contact groups. They can still create, rename and delete groups, and manage contacts.
  • rebooting phones on Apps → Registrations. They can still see the list.
  • the Activity, Team boards and Wallboard tabs under Apps
  • Transfer and Hang up on Live calls. They can watch.

Some things only Vostel can do. If you need one of these, contact Vostel:

  • add or delete extensions and phone numbers
  • enable or disable an extension
  • edit your company details (name, address, contacts, bank-holiday region)
  • turn Meg AI features on or off, or change your monthly transcription limit
  • set up trunks (gateways) and outbound routes
  • load call history from before you joined Lisa

2. Signing in

2.1 Your first sign-in

  1. Go to Lisa and enter your Email and Password, then click Sign in.
  2. Two-factor authentication (2FA) is required for every Admin. The first time you sign in, you see Set up two-factor auth:
    1. Scan the QR code with an authenticator app, such as Google Authenticator, 1Password or Authy. If you can't scan it, type in the key shown underneath instead.
    2. Enter the 6-digit code the app shows, then click Turn on 2FA.
    3. Lisa shows your recovery codes. Click Copy codes and keep them somewhere safe. Each code gets you in once if you lose your phone.
    4. Click I've saved them — continue.
  3. After that, each sign-in asks for the current code from your app. If you don't have your phone, choose Use a recovery code.

2.2 Forgotten password

  1. Click Forgot your password? on the sign-in page.
  2. Enter your email and click Send reset link.
  3. Open the email and click the link within 1 hour, then choose a new password.

Password rules (these apply to every password in Lisa):

  • at least 12 characters
  • at least 3 of these 4: lowercase letters, uppercase letters, digits, symbols

Sessions. Lisa keeps you signed in while you are active. Click the log-out icon beside your name at the bottom of the sidebar to sign out.

3. Finding your way around

3.1 The sidebar

Section Item What it's for
Overview Dashboard Today's calls at a glance and what needs attention.
Overview Analytics Trends, missed business and scheduled report emails. Only shown if you have been given Analytics access.
Phone System Manage Your phone system: numbers, routing, extensions, voicemail, call records and more.
Phone System Contacts The names Lisa shows on incoming calls.
Phone System Integrations Meg AI, alerts and webhooks, API keys, the phone directory, CRM connections and screen-pop.
Phone System Tasks Promises made on calls, from Meg AI. Only shown if you can see recordings.
Phone System Users The people who can sign in to Lisa.
Billing Invoices Copy invoices. Only shown if you have been given Invoices access.
Help What's new New features in Lisa. Shown once there is something on it.
Help Feedback Send Vostel an idea, a problem or a comment, and see what happened to the ones you've sent (see the User guide).
Help User guide / Admin guide / Video guides Open these guides and videos on the Vostel wiki.
Help API docs Reference for developers using the Lisa Customer API.

Fold a section away. Click a section heading (e.g. Help) to hide its links; click it again to show them. Lisa remembers this in your browser. A folded section shows how many links it holds, and the page you're on stays visible underneath.

Wall displays. If an Admin has ticked Show in the sidebar under Manage for the wallboard or a team board, a link to it appears under Manage. See section 5.14.

My settings. Click your name at the bottom of the sidebar. See section 13.

3.2 The top bar

  • Call box. The quickest way to call anyone, from any page:
    • Type a name or company. Matching contacts appear underneath; click one, or press Enter to call the first. Use the arrow keys to choose another.
    • Type or paste a number and press Enter, or click Call.
    • Your own phone rings first; answer it and Lisa dials.
    • The call box only shows if your user has an extension.
  • Callback bell. Shows open callback requests and how long each caller has waited. Click one to go to Manage → Callbacks.
  • Calls live. How many calls are in progress right now, on every page. It turns green when there's at least one. Click it to open Live calls. See section 6.

3.3 Floating items

  • Ask Lisa (bottom-right), if your company has it. See section 14.
  • Incoming-call popups, if you've turned them on in My settings.

3.4 How saving works

The same pattern is used everywhere in Lisa:

  • Creating something (a new ring group, IVR, voicemail box and so on): fill in the form and click the Create … button.
  • Editing something: changes save as you go. There is no Save button:
    • text boxes save when you click or tab out of them
    • drop-downs save as soon as you pick
    • the footer shows Saving… and then ✓ Saved
    • click Done when you've finished
  • If a save fails, the error shows in red and the field tries again the next time you change it.
  • Changes reach the phone system straight away, within a few seconds.

4. Dashboard

The Dashboard shows today for your company.

Today

Five cards. Click any of them to open the matching call records:

Card Meaning
Calls today Every call
Answered today Inbound calls a person picked up
Missed today Inbound calls nobody picked up
To call back People missed today who are still waiting: not yet rung back and got through, and not answered since when they rang again. Each person counts once; withheld numbers aren't counted. Click it to see them.
Outbound today Calls your team placed
Avg call length Average talk time

What counts as answered and missed. Both figures count inbound calls only.

  • Answered means a person on an extension (1000–1999) picked up.
  • A call that ended in the IVR, went to voicemail or was abandoned counts as missed. A call Meg, the AI receptionist, ended by taking a callback doesn't: the callback is waiting in Callbacks.

Today's activity

An hour-by-hour bar chart of answered, missed and outbound calls, with the busiest hour marked.

Right now

  • Waiting on a call back. Callers who asked for a call back, plus a separate link for requests Meg AI picked up from calls.
  • Follow-ups outstanding. Things promised on calls that aren't done yet (needs Meg AI). Tick the box to mark one done, or click it to open the call it came from.
  • Diverted. Numbers, ring groups and extensions currently forwarded somewhere.
  • Do not disturb. Extensions with DND on.

If none of these has anything in it, you see All clear.

5. Manage: your phone system

Click Manage in the sidebar. The header shows your company, domain and phone system.

The tabs are Numbers · Time conditions · IVR · Ring groups · Extensions · Voicemail · Call records · Callbacks · Greetings · Apps. Tasks and Users have their own places in the sidebar, under Phone System.

5.1 How calls flow

A call arrives on one of your numbers and follows a chain until someone answers or it ends:

Number → Time condition (open or closed?) → IVR ("press 1 for…") → Ring group → Extension(s) → Voicemail

Every step is optional, and you can point any step at any other.

Vostel's standard numbering:

Range What
1000–1999 Extensions (people and phones) and their voicemail boxes
2xxx Ring groups
5xxx IVR menus
6xxx Time conditions
6999 The bank-holiday gate (created for you; extra sites count down: 6998, 6997…)
*80–*89 Callback request codes
*99 plus the box number Voicemail box, used as a destination (e.g. *991001)

Picking a destination. Every “route to” drop-down in Lisa lists your Extensions, Ring groups, IVR menus, Time conditions, Voicemail and Call back codes.

Deleting something that's in use. Lisa won't delete an item that something else still routes to. It tells you what is using it, so you can repoint that first.

5.2 Numbers

Your phone numbers (DIDs).

  • Routing shows where each number goes first, e.g. “→ 2000 · map”. Click it to open the routing map (see section 5.3).
  • Forward sends a number to an external number, such as a mobile or another office:
    1. Click Forward and enter the External number.
    2. Leave Prompt to accept ticked for mobiles. The person answering must press 1 to take the call, which stops the mobile's voicemail answering it. It's ticked automatically for mobile numbers.
    3. Click Forward. The number now shows an amber pill.
    4. To stop forwarding, click the X on the pill. The number goes back to its previous routing.
  • Edit (pencil) changes the Caller ID name and Description.

To add or remove a number, contact Vostel. Admins can enable or disable a number: open it and change Status. A disabled number takes no calls.

Sites. A site groups your numbers, e.g. Kirkby for its two lines. Click Manage sites (on the Sites card above the Numbers list) to add, rename or remove sites, then pick each number's site in the Site column. A number is in one site at most. Sites are used by contact groups' VIP routing (When they ring → Only these), and removing a site leaves its numbers in place, just without a site.

  • Site route: in Manage sites, choose where a site's numbers go (Route to, e.g. the Kirkby opening hours). Every number in the site is pointed there straight away, and a number added to the site later follows it too. Change the site's route and they all move together, live. Custom code… works here too (e.g. *777). Lisa can't check that the code exists.
  • Own route: point one of the site's numbers somewhere else (on the routing map) and it shows own route on Numbers, and is left alone when the site's route changes. Click follow site to put it back.
  • No site route leaves every number where it is.

Site switches. The Sites card above the Numbers list (Admins only) has a row for each site. Each site shows Open, or what it's doing now and until when.

  • Close: send all the site's numbers to one place, e.g. a voicemail box, a ring group, or another site (its calls then go wherever that site's go). Choose how long: Until I switch it back, For 1 hour, Until 5pm today or Until 8am tomorrow. Reopen puts each number back where it was.
  • Forward: send every call to the site's numbers to an outside number, e.g. a mobile, for the same choice of time. Stop forwarding brings the normal routing back.
  • If you change one of the numbers yourself while the site is closed or forwarded, Lisa leaves that number alone when it reopens.
  • Overflow: when nobody answers a site's ring group, send the call to another site instead, e.g. Ormskirk's unanswered calls ring the Kirkby team. It follows the other site's route, so if you change that site's route, the overflow follows. Choose Off (no overflow) to put the ring group's old no-answer destination back. The other site needs a site route first.
  • The routing map shows a Site box between a number and where it goes, with the site's state, e.g. Closed until Wed 17:00.
  • Ask Lisa can do this too: “Close Kirkby until tomorrow and send calls to Ormskirk”, “Forward Southport to my mobile”, “Reopen Kirkby”. As always, it shows a card and nothing changes until you confirm.

Site filter. Once you have sites, Call records and Analytics (including Missed business and Money on the table) get a Site picker to show just the calls to that site's numbers. Drill-throughs and exports keep the site.

5.3 Routing map

The routing map is a left-to-right chart of everything a number's calls can go through.

  • Green boxes and lines marked LIVE are where calls go right now. They follow whichever time rule is currently active and refresh every minute.
  • An extension on do-not-disturb shows a DND chip.

To change routing (Admins only):

  1. Click any box with a ✎, or any blue line.
  2. In the side panel, pick a new destination and click Save. Before you save, the panel shows the old and new destination.
  3. You can change:
    • where a number routes
    • the destinations of a time condition's rules
    • IVR options
    • a ring group's no-answer destination and its members
  4. A number, or a ring group's no-answer, can also be set to Hangup — answer and end the call.
  5. Custom code… accepts any dial code, e.g. *777. Lisa can't check that a custom code exists, so a typo will send calls nowhere. Use it with care.

Users (non-Admins) can view the map. Clicking a box takes them to that item's tab.

5.4 Time conditions

Time conditions send calls to different places depending on the day and time, such as open and closed.

Bank holidays (the panel at the top):

  • Turning it on. Click Turn on and choose two destinations:
    • On a bank holiday, route to (e.g. a “we're closed” greeting or voicemail)
    • Otherwise, continue to (your normal destination)
  This creates the **6999** gate. Point a number at 6999 in the routing map to use it.
* **More than one site.** If your sites have their own numbers, click **+ Add site**, name it (e.g. Cardiff) and choose that site's two destinations. Each site gets its own gate, counting down from 6999 (6998, 6997…). Point each site's numbers at its own gate. All sites share the same region and closures.
* The panel lists each site's gate with where it sends calls on a closure, otherwise, and **Now**. The pencil edits a site's name or destinations; the bin removes its gate. Lisa won't remove a gate while a number still points at it. The gates aren't repeated in the Time conditions list below.
* **Dates.** Holiday dates update automatically for your region (England & Wales, Scotland, Northern Ireland or Republic of Ireland), including **substitute days** (e.g. when Boxing Day falls on a Saturday, the following Monday) and any one-off bank holidays. Your region is set by Vostel.
* **Upcoming closures** lists the next holidays:
  * **Skip** stops a public holiday counting as a closure (for example, if you open that day). Click the date again to restore it.
  * **+ Add closure** adds your own closure, such as a Christmas shutdown or a training afternoon. Give it a date and an optional end date. Leave the times blank to close for whole days, or add them to close for part of a day.

Time conditions list. Each one shows:

  • its rules
  • a live Now → … badge saying where calls go at this moment

Click + New (or the pencil to edit) and fill in:

  • Name and Extension. Use the 6xxx range, e.g. 6010. The extension can't be changed later.
  • Rules, which are checked from top to bottom; the first rule that matches wins. Each rule is one of:
    • Weekly: pick the days and a From and To time
    • Date range: a start date and time and an end date and time, for one-off closures
  • Then go to →: where each rule sends the call.
  • Otherwise (no rule matched) →: where calls go the rest of the time.
  • Both lists include Custom code… (e.g. *777), as on the routing map. Type the code and press Enter. Lisa can't check that it exists, so double-check it.

Use the arrows on a rule to change its priority. A date range that has ended is marked Past and can be deleted.

When a schedule saves. The schedule saves only once every rule has a destination and “Otherwise” is set.

Custom schedules. A few time conditions built directly on the phone system use schedules Lisa can't edit. For those, change the destinations from the routing map.

5.5 IVR menus

Auto-attendant menus (“Press 1 for sales…”).

Click + New and fill in:

  • Name and Extension. Use the 5xxx range, e.g. 5010.
  • Greeting: the recording played to callers. Upload it first on the Greetings tab.
  • Timeout (ms): how long to wait for a key press.
  • On timeout / no valid option: transfer somewhere, or hang up.

Then add the menu options:

  1. Type the Digit.
  2. Optionally, add What it's for.
  3. Pick the destination last. Picking the destination adds the option.

5.6 Ring groups

A ring group rings several extensions for one call. The list shows each group's members and its No answer destination, with the ring timeout after it (e.g. “Closed Voicemail (*991099) · 30s”).

  • Ring strategy:
    • simultaneous: everyone at once
    • sequence: one after another
    • enterprise: everyone at once, each ringing independently
    • rollover: the next free person
    • random: in random order
  • Ring timeout (s): how long to ring before giving up.
  • No answer →: where the call goes next, e.g. voicemail. It can also be Hangup.
  • Greeting, Hold music and Ringback use recordings from the Greetings tab. Ringback defaults to the normal UK ring tone.
  • Call prefix: text added in front of the caller's name on your phones (e.g. “Sales”), so staff know which group the call came through.

Members. Create the group first, then reopen it to add members. For each member you can set:

  • Delay: seconds before that member starts ringing
  • Timeout: how long that member rings

You can also add an external number as a member. It rings alongside your extensions and goes out over your normal phone line.

Other actions:

  • Copy makes a new group with the same settings and members, including each member's delay and timeout.
  • Forward sends the group to an external number:
    • Every call, or
    • On no answer, which rings the group first

The “You” column. Anyone with an extension, Users included, can Join or Leave a group here. Leaving remembers your delay and timeout, so rejoining puts you back exactly as you were.

5.7 Extensions

One row per phone or person:

  • Reg: how many devices are signed in on that extension right now.
    • red = none
    • green = within your allowance
    • amber = more than you're allowed
  Click the badge to see the devices.
* **Outbound ID**: the number your customers see when this extension calls out. Change it inline.
* **Forwarding**: send this extension's calls to another destination, or to an **External number…**.
* **DND**: turn do-not-disturb on or off. Users see the setting but can't change it here; they use Ask Lisa or their phone.

Click the pencil to edit an extension:

  • SIP password: hover to reveal it, or copy it for setting up a phone. Type to change it.
  • Team board photo: upload a photo for team boards. It is cropped to a square.
  • Hold music: what callers hear when this extension puts them on hold: the switch default, a music-on-hold category, or one of your recordings from Greetings.
  • Internal caller name: the name shown on other extensions.
  • Outbound caller ID: required.
  • Call forward: internal (another extension, group and so on) or external (a phone number).
  • Ring timeout (s) and Description.

To add or remove an extension, or enable or disable one, contact Vostel.

Registrations. To see every signed-in device, or to reboot phones, go to Apps → Registrations (see section 5.13).

5.8 Voicemail

Mailboxes are numbered 1000–1999, normally matching the extension.

To create a box, click + New and fill in:

  • Mailbox
  • PIN: 4–10 digits. Leave it blank for a random 4-digit PIN.
  • Name
  • Notification email
  • Email the recording: Attach audio or Link only.
  • Keep a local copy: whether the message stays in the mailbox after it has been emailed.

When you edit a box, the Greeting section lets you:

  • upload greetings (.mp3 or .wav, up to 8 MB)
  • choose which greeting is active
  • go back to the default system greeting

Messages (the inbox icon) lists the saved messages. Each shows the caller, the date and any transcription. You can play, download or delete each one.

To send calls to a mailbox, choose it under Voicemail in any destination drop-down.

5.9 Greetings

Recordings used by IVRs, ring groups and callback codes.

  • Upload file: .mp3 or .wav, up to 8 MB. Give it a name.
  • Generate with Meg AI (if your company has Meg AI):
    1. Type the Script.
    2. Pick a Voice.
    3. Click Preview to hear it. Change the script or voice and click Regenerate until it sounds right.
    4. Click Save greeting. The recording you last previewed is saved, exactly as you heard it.

A greeting that an IVR still uses can't be deleted. Change the IVR first.

5.10 Call records

Every call your company makes or receives.

Finding calls:

  • Filters: date range, caller, number or line dialled (Caller destination), Direction (Inbound / Outbound / Local), Status (Answered / Missed) and, where callers go through a menu, Option (each option callers chose in the last 180 days, or No option chosen). Combine Option with Status to see, say, every option 2 call that was missed.
  • With Meg AI you also get:
    • Quantum search, words said…: searches what was said on transcribed calls. A reg or part number (all or part of it, e.g. EX61) also finds it spelled out: E X 61, Echo X-ray 61 or echo x-ray sixty-one. Typing it spelled out (Mike Tango 61) works the same as MT61.
    • Mood (Positive / Neutral / Negative, or calls Meg AI flagged)
    • Outcome (Booked, Quoted, Complaint, Lost and so on)
  • Columns chooses which columns you see. Lisa remembers your choice.
  • Filter chips. Some links into Call records add a filter shown as a chip at the start of the filter row. Click the chip's ✕ to remove it.
    • Line …: one of your numbers, from Analytics → How each line performed
    • Extension …: one extension
    • Wednesdays · 10:00–11:00 (for example): one weekday and hour across the date range, from a square on the Analytics heatmap

Row actions:

  • Number: click to call it back. Your phone rings first.
  • ⋮ More actions (external callers):
    • Add as contact
    • Block number
  • i (Call flow), on inbound calls: shows the path the call took through your numbers, time conditions, IVRs and groups.
  • IVR option: under the number dialled, the option the caller chose in your menu, e.g. Option 2 · Vehicle on site. The name is the option's description on the IVR at the time of the call or, if it has none, the name of where the option goes (a ring group, extension or menu). Give your options descriptions to get the clearest names. Pressed 21 means keys that aren't an option. If a call went through two menus, it's the last one. Recorded from 14 October 2026. Also in Export (an Option column), the incoming-call popup, alert emails and the API.
  • Recording: play (with speed control) or download.
  • Meg (AI receptionist): a blue dot beside the status dot when Meg answered the call before anyone's phone rang. Hover for what she did (put through to a team, took a callback, caller hung up) and the caller's reason. Click it to read her conversation. The transcript window then has Meg and Call transcript at the top to switch between her conversation and the Meg AI transcript.
  • ✨ Meg AI transcript: a summary, outcome, next steps, the full transcript with speakers, and mood, with a Play recording button at the top so you can listen while you read. Ask Lisa's “Open the call” links open this same window. If a call hasn't been transcribed, click Transcribe this call.
  • Bin: removes the call and its recording from Lisa permanently.

Other tools:

  • Export: downloads the filtered list as CSV. It uses every filter on screen, chips included.
  • Tick calls → Download N recordings: downloads several recordings at once as a zip.
  • Recordings (top right): downloads a whole month of recordings. Lisa builds it in the background and emails you a link when it is ready (zip files of about 2 GB, deleted after 24 hours or with Delete now). Available to anyone allowed to play recordings.

Who can see what. You can hide call records, or recordings only, from particular users, or limit them to their own calls, with Page access (see section 12).

5.11 Callbacks

The callback queue: callers who dialled a callback code (*80–*89) to ask to be rung back. With Meg AI, it also includes requests picked up from what was said on a call, marked ✨ From the call. If Meg, the AI receptionist, answers your number, callbacks she promises land here too, marked From Meg. Their note gives the caller's reason and exactly what she told them would happen. Like a callback code, they count as Open, in the bell and in the overdue reminder.

  • Filters: Open / New / In progress / From the call / From Meg / Done / All. From Meg shows just Meg's open callbacks (they are in Open as well).
  • Assign a request to a person. It moves to In progress.
  • Call back: rings your phone, then the customer.
  • When you've finished, mark it Done, or dismiss it (X). Reopen brings it back.
  • A request turns red after 30 minutes' wait.

To set up the codes themselves, see Apps → Callback setup in section 5.13.

Overdue reminder. If a caller who dialled a callback code (or was promised one by Meg) waits longer than the limit, a red banner appears on every Lisa page for everyone on your account: how many are waiting and the oldest. It clears when the request is called back or marked done on Callbacks. Snooze 15 min hides it on your browser for 15 minutes, and Configure (admins) jumps to its settings. Set it in Apps → Callback setup → Overdue reminder:

  • Remind after: 15 minutes to 4 hours, or Off. The default is 30 minutes.
  • Only while open, per: choose your opening-hours time condition so nobody is reminded when you're closed (its “otherwise” branch, date-range closures, and bank holidays when you use the bank-holiday gate all count as closed). Any time reminds whenever someone is logged in.

5.12 Tasks

This tab needs Meg AI. It lists the promises your company made on calls: Call back, Send (a quote, invoice, photos), Order / check (parts, stock, warranty) and Book in. Things the customer said they'd do, and workshop jobs that happen anyway, stay on the call and off this list.

  • Filters: Open / Mine / Overdue / Done / Lapsed / All / Ignored.
  • Due dates: the time said on the call; otherwise call backs are due the same day and everything else the next working day.
  • Lisa closes promises herself when a later call shows them kept:
    • a call back, when someone rings that number and gets through (Closed by Lisa: Rang back Tue 14:02, 3 min by Sam)
    • a booking, when a later call with them ends in a booking
    • untick to reopen if she got it wrong
  • Mine: handed to you, or made on a call your extension took and not handed on.
  • Assigned automatically: each promise is assigned to the person whose extension took the call (when exactly one Lisa user has that extension). Change it in the Who's doing this dropdown; Lisa never overrides your choice.
  • Reminders: open promises show on the incoming-call popup when that customer rings again (We owe them), on each person's My phone (You owe), and in an 8am weekday email to each person who has some (they can switch it off in My settings → Notifications).
  • Lapsed: open promises nobody acted on for a week leave the open list. They're still counted and still on the call.
  • Working a task:
    • tick it when it's done
    • assign it to someone
    • click through to the call it came from
  • Ignore removes a task that was a false alarm.

5.13 Apps

Sub-tab What it does
Activity Recent changes made in Lisa for your company, and who made them.
Call block Numbers whose inbound calls get a busy tone. Use Block a number to add one, or the bin to unblock. You can also block from a call record's ⋮ menu.
Callback setup The *80–*89 codes callers dial to request a call back (see below).
Registrations Every phone or app signed in right now: extension, IP address, device. Tick devices and click Unregister & reboot to restart them. Calls on those devices drop and the phones are offline for about a minute.
Team boards Live screens showing a team's status (see section 5.14).
Wallboard A live company-wide call board for a TV (see section 5.14).

Callback setup.

  1. Click + Add callback. Lisa assigns the next free code.
  2. Enter the Notify emails: who gets emailed when a caller uses the code.
  3. Choose what it Plays to the caller.
  4. Put the code in an IVR option, e.g. “press 9 to request a call back”, or use it as a destination.

When a caller uses the code, they appear in Callbacks. Lisa also emails the Notify emails straight away, with the caller's name and company if they're in your Contacts, their number, the time, any notes, and an Open callbacks button. (Older codes may still show Phone system under Emails: those send a number-only email until Vostel moves them to Lisa.)

To change a code later, click its pencil. You can change the name, notify emails, status and description, and pick a different greeting under Plays. To use new audio, add it on the Greetings tab first, then choose it under Plays.

5.14 Wallboard and team boards

These are no-login links for a TV or wall screen. They update every few seconds.

Wallboard (Apps → Wallboard):

  • Shows today's company totals: total, incoming, outgoing, active, ringing, answered, missed, average call length and answer rate. It compares them with the same time last week.
  • To call back (next to Missed): how many people missed today are still waiting: not rung back and got through, and not since answered when they rang again. Withheld numbers aren't counted. It has no last-week comparison. Click it to see today's Missed – not called back calls.
  • Generate link creates the URL. Open it on the screen.
  • Rotate link replaces the link; the old link stops working. Revoke turns the link off.
  • Excluded from the board hides internal codes from the counts, e.g. *99% for voicemail or *8% for callbacks. % is a wildcard.

Department wallboards (Apps → Wallboard → New department wallboard): the same big board for one department.

  • Name it (e.g. Sales) and tick its ring groups (e.g. 2000 and 2001). Each department wallboard has its own Generate display link, Rotate, Revoke and Show in the sidebar under Manage.
  • Incoming counts calls that ended at those ring groups; Outgoing counts calls made by their members (a ring group inside a ring group is included). Active and Ringing are the department's live calls.
  • A call counts where it ended up. One that rang the group unanswered and then went to voicemail, or was transferred outside it, isn't on the department board. The company wallboard still counts it.
  • Its tiles don't open Call records, because that list would show the whole company's calls.

Team boards (Apps → Team boards):

  1. Click + New board, name it (e.g. Sales) and tick the agents' extensions.
  2. Click Save, then Display link.

Each agent shows as a tile with:

  • their photo (set on the extension)
  • their status: Available, On call, Ringing or Offline
  • who they're on a call with, or who is ringing them: the contact name if Lisa knows it, a colleague's name, otherwise the number. For a call placed with click-to-call, it's the number being called.
  • a DND tag
  • today's call counts

Department boards. Under Who's on this board, choose Ring groups (department) instead of Pick people, and tick one or more ring groups (e.g. Sales = 2000 and 2001):

  • The board's people are the groups' members, kept up to date as you add or remove members. A ring group inside a ring group is opened up too. The window tells you who will show before you save.
  • Above the tiles, a strip shows that department's day: Incoming, Outgoing, Answered, Missed, To call back, Ringing, Active and ALOC, with ▲▼ against the same time last week.
  • Incoming counts calls that ended at those ring groups; Outgoing counts calls the department's people made.
  • A call counts where it ended up. One that rang the group unanswered and then went to voicemail, or was transferred to someone outside it, isn't on this board. The company wallboard still counts it.

Show in the sidebar under Manage puts a one-click link to the board in everyone's sidebar.

Zoom. To make a board bigger or smaller on the screen, move the mouse: −, the zoom level and + appear in the bottom-right corner. Click the percentage to go back to 100%. With a keyboard, +, − and 0 do the same. Each screen remembers its own zoom.

Keep these links private. Anyone with the link can view the board. If a link gets out, rotate it.

6. Live calls

Click N calls live in the top bar, from any page. Calls appear the moment they start, showing:

  • who is calling (the contact name, if Lisa knows it)
  • who they're talking to
  • how long the call has lasted

Calls drop off the moment they end. Lisa also checks the list against the phone system every 30 seconds while the page is open, so a call that has ended always goes within about a minute, even if the hang-up was missed.

Admin actions:

  • Transfer: moves the caller to another extension or number immediately, without a consultation.
  • Hang up (red phone icon): ends the call.

7. Contacts

Contacts are the names Lisa shows on incoming calls: in call records, popups, live calls and alerts.

Where contacts come from

  • manual: added in Lisa. These are Lisa-only and visible only in Lisa.
  • directory: your company phone directory. These names also show on your desk phones.
  • Garage Hive: synced one way from Garage Hive (Microsoft Dynamics Business Central).
  • Zoho CRM: synced one way from Zoho.

Adding a contact

  1. Click New contact.
  2. Choose Save to:
    • Directory: appears on desk phones too
    • Lisa-only
  3. Enter the Name, optionally the Company, and up to four numbers (Telephone 1 and 2, Mobile 1 and 2).
  4. For Lisa-only contacts you can also add Email, URL and Notes. The URL and notes show on the incoming-call popup.

Other ways to add contacts:

  • From Call records: ⋮ → Add as contact.
  • Convert to directory contact (server icon) moves a Lisa-only contact into the phone directory. To move it back, delete it and add it again as Lisa-only.

Importing from a spreadsheet

  1. Click Import. Choose a CSV file, or click Download template to get the column layout.
  2. Lisa recognises these columns:
    • Name, or First and Last name
    • Company
    • Telephone and Mobile
    • Email
    • URL
    • Notes
  3. Check the preview. It shows how many rows are ready to import, how many are duplicates and how many have errors. Duplicates are matched by name and are skipped.
  4. Choose Directory or Lisa-only. Lisa-only is the default.
  5. Click Import N contacts.

Exporting to a spreadsheet

  • Export downloads the contacts as a CSV file. Any search or group filter applies, so you get what's on screen (all pages).
  • The columns match the import template (Name, Company, Telephone 1–2, Mobile 1–2, Email, URL, Notes), plus Groups and Source. You can edit the file and import it again; Lisa ignores the extra two columns.
  • Every role can export. Each export is recorded in the audit log.

Groups and VIP routing

  • Groups creates groups (e.g. VIP, Key accounts) to organise and filter contacts. Add a contact to a group from the Groups column, or from the contact's own page.
  • VIP routing (the icon on a group's row) makes calls from anyone in that group skip your time conditions and IVR and go straight to one extension, ring group or voicemail box. Under When they ring, choose All numbers, or Only these and tick one or more sites and/or individual numbers: VIP callers ringing any other number are routed normally. For example, a fleet customer's calls to the Kirkby site go straight to the Kirkby ring group.
    • It takes effect on the phone system immediately.
    • To turn it off, choose Off — route normally.
  • Deleting a group doesn't delete the contacts in it.

If the phone directory isn't set up, Admins see a banner linking to Integrations → Directory.

8. Analytics

Analytics only appears if you have Analytics access. Ask your Admin, or Vostel, to grant it (Users → Edit → Page access).

Calls from numbers on your Call block list are left out of Analytics (and the Dashboard figures), so they don't count as missed. They still appear in Call records.

  • Date range: pick 7 days, 30 days, 90 days, 12 months or Custom. The figures are compared with the previous period of the same length.
  • Inbound calls / Answered / Missed: click any of them to see those calls.
  • Missed business: first-time callers who got no answer and never rang back. These are likely lost customers.
    • Open the chase list shows all of them. Call back rings your phone first.
    • Ignore hides a number that isn't worth chasing (spam, a wrong number) for everyone. Restore all, next to the “ignored” count, brings them back.
  • Money on the table (with Meg AI): quotes, promised call backs and missed opportunities Meg AI found on your calls, with what they're worth.
    • On the table: still worth chasing. Won back: a later call with that customer ended in a booking. Slipped away: a later call ended “lost”, or a week went by with neither.
    • Click a total to see its list, biggest first; click a name to open the call.
    • Values said on the call are shown as they are. ≈ values are estimates from your Price list (Integrations → Meg AI), and only appear when you have one; hover one to see how it was worked out. A figure only counts as “said” if a £ amount was actually spoken.
    • Each customer counts once (their latest call), so a regular who rings three times about the same job isn't counted three times.
    • The Dashboard shows the week's totals in a Money on the table card (for anyone with Analytics access). The email report includes it too.
  • When your phones are busy: a day-by-hour heatmap of inbound calls, in your company's local time. Click a square to see the calls it counts: that weekday and hour, across the whole date range.
  • Answer rate: the share of calls answered per day, against a 90% target line.
  • How each line performed: calls, answered and missed for each of your numbers. Lines below 85% answered are highlighted.
  • Export downloads the calls for the selected range as CSV.

Email report (Admins)

Click Email report (the cog icon) to set up a regular summary email:

  • Status: On or Off
  • Recipients: separate addresses with commas
  • Frequency: Weekly (with a Day) or Daily
  • Time, in your company's time zone

Settings save as you go. Send a test sends a real copy now. A weekly email covers the last 7 days; a daily one covers the last 24 hours. Either way it shows:

  • calls answered and missed
  • the change on the period before
  • how many first-time callers are worth chasing

9. Integrations

Integrations is for Admins. Tabs: Meg AI · Alerts · API keys · Directory · Garage Hive · Zoho CRM · Screen-pop.

Meg AI

Meg AI is a paid add-on, switched on by Vostel. This tab shows whether your company has the Meg AI subscription, whether auto-transcribe and Ask Lisa are on, which calls are transcribed automatically (for example “inbound and outbound calls, 15 seconds or longer”), and how many transcriptions you've used. To change which calls are included, contact Vostel. You can still transcribe any other call with the ✨ button.

With Meg AI you get:

  • Call transcripts: who said what, a summary, the outcome, next steps and mood
  • Tasks and callback requests detected by Meg AI
  • Generate with Meg AI for greetings
  • Ask Lisa, if Vostel has enabled it for you

Point out missed opportunities (your choice): lets Meg AI flag calls worth a second look. Examples are a quote with no follow-up arranged, or a customer close to complaining.

To turn Meg AI on, or change your limit, contact Vostel.

Price list. In Integrations → Meg AI → Price list, list your usual prices so Meg AI can put a value on calls when nobody said a figure: a booking, a quote, or a missed opportunity (an air-con regas mentioned but never offered). These always show as estimates (“≈ £300 est.”, “Worth about £300 · Air-con servicing (price list)”), never mixed up with a figure said on the call.

  • Add a row per job: Item, Price £, Up to £ for a range (a service from £150 up to £500; Meg AI takes the lower price unless the call points higher), Per (e.g. each), and Words customers use (air con, regas, AC).
  • Or click Paste from a spreadsheet and paste rows copied from Excel or Google Sheets: item, price (or a range like £150–£500), up to, per, words.
  • It saves as you type. The words also help Meg AI hear your terms correctly on calls.
  • It applies to calls analysed from then on.

Alerts (email and webhooks)

Alerts send call events somewhere as they happen.

  1. Click New alert.
  2. Choose Deliver via:
    • HTTP webhook: a URL. Slack and Microsoft Teams webhook URLs are formatted automatically; other URLs get signed JSON.
    • Email: one or more addresses. Alert emails come from alerts@hashkey.co.uk (“HashKey Alerts”). Add it to your safe senders so they never land in junk. Call back request emails come from the same address.
  3. Tick the Events. They come in three groups:
    • Live calls
      • Call inbound: a call arrives on a number
      • Call answered: a person picked up
      • Call ended
      • Call missed: nobody answered
    • Follow-up
      • Missed again today: the same number has been missed twice or more today. Sent once per number per day, so a caller who keeps trying doesn't flood you.
      • Voicemail left: a caller left a message. Says which voicemail box and how long the message is.
      • Call back requested: a caller asked for a call back (*80 to *89), or Meg, the AI receptionist, promised one. Meg's say via Meg, with what the caller wants and exactly what she promised, and URGENT when she judged it urgent. An alert limited to particular codes doesn't include Meg's.
      • Call back overdue: a call back request still waiting after the time set in Apps → Callback setup, during opening hours. Sent once per request.
    • From Meg AI (needs Meg AI transcription; only calls with a recording)
      • Negative mood: the caller was unhappy
      • Complaint: a complaint was made about the business
      • At risk: likely to escalate if nobody acts
      • Booked: work or an appointment was booked
      • Words said: any of your words was said on the call. Type them in Words to watch for, separated by commas: words, phrases or registrations, e.g. refund, solicitor, timing belt, AB12. Registrations match however they were said, like Quantum search: AB12 also finds “Alpha Bravo one two”.
    • Meg AI alerts arrive a few minutes after the call, once it has been transcribed, and include Meg AI's summary. Only calls from the last few hours alert: transcribing old calls doesn't send a flood.
  4. Optionally, choose a Target so the alert only fires for one ring group or extension. For example: “tell the sales channel in Teams about missed calls to ring group 2000”.
  5. Alert emails include the Option the caller chose in your menu, if any, and the contact's name and company when they're in your contacts.
  6. Callers on your Call block list never trigger a missed-call alert. The phone system turns them away, so there's nothing to chase.
  7. Click Create alert.
  8. For webhooks, copy the signing secret now. It is shown only once. Your developer uses it to check the X-Lisa-Signature header.

Managing alerts:

  • Test: sends a sample of any event, so you can see what it looks like.
  • The log icon shows each delivery attempt.
  • Failed deliveries are retried.
  • An alert that fails 50 times in a row is switched off automatically (Auto-disabled). Fix the endpoint, then click Enable.

API keys

An API key lets your own software (a CRM, a script) use the Lisa Customer API. With it, software can:

  • read call records and transcripts
  • look up and manage contacts
  • see live calls
  • place calls

To create a key:

  1. Click New key.
  2. Give it a Name (e.g. “Acme CRM”).
  3. Optionally, set a Default extension for click-to-dial.
  4. Tick only the Permissions it needs. Reading call records, transcripts and contacts is ticked by default. Downloading recordings, changing contacts, placing calls, requesting transcriptions and webhooks must be ticked on purpose.
  5. Click Create key.
  6. Copy the key now. It is shown only once.

The full reference is at API docs in the sidebar. Revoke (the bin) stops a key working immediately.

Directory

The phone directory is your company phonebook. It is shared with your desk phones, so directory contacts show by name on the phones as well as in Lisa.

  • Setting it up. Tick Enabled and click Provision directory. This creates the directory and a read-only password. Then click Save.
    • When you first enable it, Lisa offers to import the directory's contacts. Choose Sync now.
  • Connection details shows the settings for configuring phones (host, bind user, base DN, password).
  • Test lookup checks that a number is found.
  • Sync now re-imports the directory.

Garage Hive

This tab syncs contacts from Garage Hive (Microsoft Dynamics Business Central). Vostel sets up the connection. Once connected, click Sync now at any time to refresh.

Each contact brings its name, phone numbers, URL and comments, plus the customer's Rank code and NPS score. The comments, rank and NPS show on the incoming-call popup.

Zoho CRM

This tab syncs contacts from Zoho CRM. You connect it yourself, because only your own Zoho login can give permission.

  1. Choose your Data centre. UK organisations are normally eu.
  2. Click Connect to Zoho and approve access in Zoho.
  3. Tick Enabled and click Save, then Sync now.
  4. Optionally, use Push to phone directory (LDAP) to send the contacts to your desk phones too.

Keep the connecting account active. The sync runs as the person who connected it. If that person leaves Zoho, reconnect with another account.

Screen-pop

A link shown on the incoming-call popup, usually to look the caller up in your CRM. For example:

https://crm.example.com/lookup?phone={caller}

Placeholders:

  • {caller}: the caller's number
  • {did}: the number they dialled
  • {name}: the caller's name
  • {call_uuid}: the call's ID

Leave it blank for no link.

10. Invoices

Invoices appears only if you have Invoices access. It lists your copy invoices: issued date, due date, status (paid, due or overdue) and total.

  • Filter by All, Due, Overdue or Paid.
  • View opens the PDF; the download icon saves it.

11. Making and taking calls from Lisa

Anyone with an extension can place calls from Lisa. In every case your phone rings first. Answer it and Lisa connects you.

  • The call box in the top bar: type a contact's name, or a number.
  • Click a number in Call records or Contacts.
  • Call back on the Analytics Chase list.
  • Call back on a callback request.
  • Chrome extension: right-click any phone number on any website (see section 13).
  • Ask Lisa: “Call 07700 900123”.

If you don't have an extension, the call box is hidden, and calling from Call records or Callbacks asks which extension to ring. Ask an Admin to set your extension on your user.

12. Users

Users (in the sidebar, under Phone System) lists everyone at your company who can sign in to Lisa. Anyone whose Page access differs from the standard shows it beside their role, e.g. Analytics · Own calls. Click a person to see their full Page access under their profile.

Adding a user

  1. Click New user.
  2. Enter their First name, Last name and Email.
  3. Set a Password that meets the rules in section 2. Tell them to change it in My settings → Security once they've signed in.
  4. Choose a Role: Admin or User.
  5. Choose their Extension. This is the phone Lisa rings when they make a call or call back from Lisa. It also decides:
    • whether the call box rings their own phone, or asks which extension to ring
    • which ring groups they can join or leave
    • which popups count as “their” calls
  6. Click Create user.

2FA. Admins must set up 2FA at their first sign-in. Users can switch it on themselves in My settings.

Editing a user

Click the user, then Edit. Changes save as you go.

  • Role and Status. Set Suspended to block sign-in without deleting the account. Suspending someone, or changing their role, signs them out everywhere.
  • Extension.
  • New password: leave it blank to keep the current one.
  • Reset 2FA: use this if they've lost their authenticator. They set it up again at their next sign-in.
  • Page access:
Setting Default Effect
Analytics No access Can view adds Analytics to their sidebar
Invoices No access Can view adds Invoices to their sidebar
Call records Can view Own calls only shows just the calls they handled; No access hides the Call records tab and call history
Call recordings Can play Own calls only lets them play and read only their own calls; No access hides recordings, transcripts and Tasks

Own calls only means the calls that person handled: answered on their extension, or dialled from it. Someone with no extension then sees none. Other people's calls don't appear at all (with call records set to own), or appear without their recording, transcript, mood or outcome (with only recordings set to own). Dashboard counts and Analytics stay company-wide.

Changing several people at once. In Users, Page access changes these settings for all Admins, all Users or everyone in one go.

Your own record. You can set your own Page access (Analytics, Invoices, Call records, Call recordings) in Users → Edit, as you can for anyone else. You can't change your own role or status: ask another Admin, or Vostel.

Deleting a user. Delete removes the person's access for good. Any callbacks assigned to them become unassigned. If the person might come back, suspend them instead.

A user who is still set against an extension can block that extension being deleted. Clear their extension first.

13. My settings

Click your name at the bottom of the sidebar. My settings is about how Lisa works for you. Your role, extension and page access are set in Users, by another Admin or Vostel.

The page has four tabs: Profile, Calling, Notifications and Security.

Profile

  • You can change your Email.
  • Mobile is used when you ask Ask Lisa to “forward my calls to my mobile”.
  • Extension shows which phone Lisa treats as yours. It's set on your user in Users.

Calling

Auto-answer calls I place from Lisa

Normally, when you start a call from Lisa your phone rings and you pick it up before Lisa dials. With this on, your phone answers by itself and you go straight to hearing the other end ring.

  1. Click Turn on.
  2. Click Test it. Lisa calls your phone; it should answer by itself and read out your extension number.

Good to know:

  • It applies to every call you start from Lisa: the call box, a number you click, Call back, the browser extension and Ask Lisa.
  • It only ever affects your own phone, and only calls you start. Incoming calls still ring as normal.
  • Your phone must allow auto-answer (often called intercom). It is confirmed working on Yealink phones; other makes should work but have not been tested yet. If the test just rings, your phone isn't allowing it; check the phone's intercom or auto-answer setting, or ask Vostel.
  • Use a headset or handsfree you're ready to talk on, as the call opens your phone's microphone straight away.

Click-to-call on other web pages

  1. Click Turn on, then Add to Chrome to install the Lisa Click-to-Call extension. It works in Chrome and Edge.
  2. Pin the extension: click the puzzle-piece icon in the browser, then the pin.
  3. Turn on calling from websites: click the extension's icon, then Enable hover-to-call on other websites, and choose Allow.
  4. Click any phone number on any web page and Lisa calls it. You can also right-click a number and choose Call with Lisa, or use the extension's popup dialer. Your phone rings, then the number is dialled.
  5. Hold Ctrl while clicking a number to use the computer's own phone app instead. On Windows, a “Select an app to open this 'tel' link” box means calling from websites isn't turned on, or the extension isn't signed in to Lisa.
  6. Stay signed in to Lisa.

If it doesn't work, click Troubleshoot. It checks:

  • your browser
  • your extension
  • the Chrome extension version
  • whether your desk phone is registered

It also has a Ring my phone test.

Notifications

Incoming-call popup

  1. Click Turn on and allow browser notifications when asked.
  2. When a call rings, Lisa shows a popup with the caller's name, company, number, the number they dialled and the contact's notes. It can also show links:
    • Open link: the contact's URL
    • Open record: your Screen-pop link
  3. If Lisa isn't the window in front, you get a desktop notification instead.

Only calls ringing my extension (recommended). You only get a popup when your own extension, or a ring group you're in, rings. Turn it off to see every call into the company.

Keep a Lisa tab open. Popups need a Lisa tab open, which can be in the background.

If popups don't appear, click Troubleshoot. It covers browser permissions and Focus / Do Not Disturb on macOS and Windows.

Security

Password

  1. Click Change password.
  2. Enter your Current password, then your New password twice. The list under the box turns green as the new password meets the rules.
  3. Click Change password.

Changing it signs you out on every other device and browser. You stay signed in where you made the change. If you've forgotten your current password, use Forgot your password? on the sign-in page instead.

Two-factor authentication

Here you can:

  • set up 2FA
  • Regenerate recovery codes
  • Disable 2FA

Each change needs a current code. Admins must have 2FA, so if you disable it you'll be asked to set it up again at your next sign-in.

14. Ask Lisa

Ask Lisa is the Meg AI assistant. It is available if your company has Meg AI and Vostel has switched Ask Lisa on for you.

Click Ask Lisa at the bottom-right. Type or dictate (with the microphone) a question in plain English, for example:

  • “How many calls did we miss yesterday?”
  • “What did I miss today?” (catch me up)
  • “What's our busiest day and time?”
  • “Where does our main number go out of hours?”
  • “Who called from 01323 305999 last week?”
  • “Who's on do-not-disturb?”
  • “Summarise the call with Smith Motors this morning.”
  • “Where do my voicemails go?” (which email address your messages are sent to; Ask Lisa doesn't play voicemail)

See everything I can do (just under the heading) lists everything Ask Lisa can help with, grouped, with an example for each; click a line to ask it. Each person only sees what they can actually do, so an Admin also sees Change opening hours, and someone without their own extension doesn't see the “your phone” items.

Ask Lisa can propose changes; you confirm them. It never changes anything on its own. It shows a card with a button, and nothing happens until you click it.

  • Do Not Disturb on or off for your own extension.
  • Forward my calls to your mobile or another number, and Stop forwarding.
  • For DND and forwarding, choose how long: 15 minutes, 30 minutes, 1 hour, 2 hours, Until tomorrow 08:00 or Until I turn it off. It switches back by itself. You can also say “DND until 2pm”.
  • Join or Leave a ring group (yourself only).
  • Call someone. Your phone rings first.
  • Change our opening hours (Admins only). The card shows the Now and New hours side by side before you confirm.
  • Forward a business number or ring group to an outside number (Admins only): “Forward our main number to my mobile until 5pm”, or “Send the sales group to 07700 900123 if nobody answers”. Choose how long, as for DND. It switches back by itself and the normal routing returns. “Stop forwarding the main number” turns it off. A number that is already forwarded must be turned off first.
  • Close, forward or reopen a whole site (Admins only): “Close Kirkby until 8am and send calls to voicemail”, “Forward Southport to my mobile”, “Reopen Kirkby”. See Site switches in section 5.2.
  • Work the callback queue: take a callback, call them back, mark it done (with a note) or dismiss it.
  • Block or unblock a number: “Block that last caller”. The card warns you if the number belongs to one of your contacts. Not available on read-only tenants.
  • Follow-ups: “What do I owe people?”, “What's overdue?”, then tick off, reopen, take or ignore one. These are the same as the Tasks list.
  • Save a contact: “Save 07700 900123 as John Smith at Acme”. It follows the Contacts page rule: into the shared directory if it's set up for writing, otherwise a Lisa-only contact.

Team performance (Admins only). “Who answered the most calls this week?” or “How is the team doing this month?” shows, for each person, calls answered, calls made, and total and average talk time, plus the team's inbound and missed totals. Missed calls usually ring a group, so they aren't pinned on one person.

Are we ready for Christmas? This lists the coming bank holidays and your own closures, and whether the bank-holiday rule is on and where it sends calls. For each number, it says whether calls on those days get the holiday routing or ring as normal. To fix a number that rings as normal, ask Lisa to add a closure to its opening hours, or route it through the bank-holiday rule on the Time conditions page.

Caller history. “What's the story with Smith Ltd?” shows a caller's contact details, recent calls (who took them, outcome, Meg AI summary), open follow-ups and any callback waiting.

What are customers calling about? “What were the main complaints this week?” or “How many bookings did we take?” summarises Meg AI's call analysis (outcomes, mood and summaries) over a period. It only covers calls that were transcribed.

Catch me up lists calls missed on your extension and your ring groups. It shows which callers have already been dealt with, and offers Call back cards for those still waiting.

Contacting Vostel. Ask “How do I contact support?”, “Who do I talk to about a new line?” or “I need a copy of an invoice”, and Ask Lisa gives you the right team: Support (support@vostel.co.uk), Sales (sales@vostel.co.uk) or Accounts (accounts@vostel.co.uk). The phone number for all three is 01323 884884. If you have Invoices access, a copy invoice is pointed to Billing → Invoices instead, where you can download it yourself.

Other points:

  • Ask Lisa only shows what you're allowed to see. If you have no access to call records or recordings, it says so.
  • Use 👍 or 👎 to tell Vostel how it did.
  • New chat starts again.
  • Ask Lisa is in beta, so check important answers.

15. Troubleshooting

You see What it means / what to do
“…is still used by: …” when deleting Something still routes to it. Repoint the items listed (use the routing map), then delete.
“Only Vostel can enable or disable this” Enabling or disabling extensions is done by Vostel. Contact support. (Admins can enable or disable numbers.)
Observing badge; “This tenant is read-only” Your account is in monitoring-only mode. Lisa shows everything but can't change anything. Contact Vostel.
Disconnected badge Lisa isn't currently connected to your phone system. History is kept, but new calls aren't recorded. Contact Vostel.
“Saved, but the switch reload failed — not yet live” The change is stored but the phone system hasn't picked it up yet. Try again in a minute; if it persists, contact Vostel.
Popups or click-to-call not working Use Troubleshoot in My settings.
Lisa asks which extension to call from Your user has no extension. Ask an Admin to set one (Users → Edit → Extension).
“Enter a valid external phone number” on Forward Forwards need a full external number, not an extension.
Meg AI transcript says “Meg AI subscription required” Meg AI is a paid add-on. Contact sales@vostel.co.uk.
wiki/guides/lisa_admin_guide.txt · Last modified: 2026/11/12 16:02 by cogs66

Page Tools